Kest Mixer ATEX – KM ATEX

Legacy, turned legendary.

Our Kest Mixer range contains 30 years of mixing experience, packaged in a robust and user-friendly product. Everything from the mixing head design, the bearing materials and its ability for full product recovery is built for one thing: perfect flow. Every day.

Technical specifications

Mixing to the last drop

The wings fixed position close to the tank bottom and the possibility to run the mixer during emptying of the tank, ensures full product recovery.

ZERO particle shedding

The robust bearing combination of Zirconium and Sic and the fine-tuned geometry, ensures no particle generation.

Minimize downtime

The low weight of the ATEX drive unit and our patented Kest-Lock connection ensures quick disconnection from the tank plate during maintenance.

Kest Mixer ATEX – for full product recovery

The Kest Mixer ATEX is a bottom mounted magnetically coupled mixer with a unique mix of intelligent controls, user-friendly design and innovative engineering. Its unique design and many powerful features provide cost efficient, low maintenance mixing processes with reliable mixing results.

Take advantage of full product recovery

The unique mixing head design and the position of the blades close to the bottom of the tank allows the mixer to run while the tank is being emptied. Mixing to the last drop with uncompromised cleanability.
Due to the low building height of the mixer head along with a lot of wing area close to the bottom the mixer is excellent in handling continues mixing of low levels as well.

Robust bearing – ZERO particle shedding

The robust bearing combination of Zirconium and Sic and the fine-tuned geometry, ensures no particle shedding in your media. The higher bending strength of the zirconium material enabled us to do the male bearing in one solid piece, this optimizes the aseptic design and increase the robustness and low wear property. The particle shedding test was done by the independent research institute RISE in Sweden according to USP<788> PARTICULATE MATTER IN INJECTIONS.

Total integrity of the tank

The Kest Mixer Tank plate is machined from a solid bar. The design is FEM analyzed to comply with PED and ASME pressure vessel code. The Tank Plate is welded into the tank and creates a solid barrier with no risk of allowing contamination of the media inside the tank.

Zone 1 and 21

The Kest Mixer ATEX is classified for Zone 1 and 21 inside and outside of the tank, to coop with most situations. Download the data sheet to get the whole ATEX string.

Minimize downtime

The drive unit is equipped with our patented Kest-Lock connection that ensures quick disconnection from the tank plate during maintenance. When you put the drive unit back on the tank plate, the spring closed Kest-Lock helps the operator to hold the drive unit in place when tightening the screw to lock it in place.

Technical specifications

  • The range covers up to 22 000 Liters or 5812 Gallon
  • ATEX Zone 1 and 21
  • All tank plates are FEM analyzed according to PED and ASTM
  • Welding tool available
  • Full traceability on all parts in media contact
  • 3.1 material certificate on all parts in media contact
  • Elastomers approved acc. FDA regulation CFR 177.2600, USP Class VI

Kest Mixer KM ATEX

Choose item

Mixing volume

30 Liter (at viscosity 1 cP)
8 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

50 - 490 RPM

Temperature range

Inside tank
Design Temperature 0°C to +150°C / +32°F to +302°F
Operating temperature 0°C to +135°C / +32°F to +275°F

Outside tank
0°C to +40°C / +32°F to +104°F

Motor power

250 W

Drive unit weight

7.0 kg
15.4 lb

Electric supply

230 V / 1.3 A
400 V / 0.75 A

Download
Mixing volume

70 Liter (at viscosity 1 cP)
18.5 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

50 - 490 RPM

Temperature range

Inside tank
Design Temperature 0°C to +150°C / +32°F to +302°F
Operating temperature 0°C to +135°C / +32°F to +275°F

Outside tank
0°C to +40°C / +32°F to +104°F

Motor power

250 W

Drive unit weight

7.1 kg
15.7 lb

Electrical supply

230 V / 1.3 A
400 V / 0.75 A

Download
Mixing volume

200 Liter (at viscosity 1 cP)
53 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

50 - 490 RPM

Temperature range

Inside tank
Design Temperature 0°C to +150°C / +32°F to +302°F
Operating temperature 0°C to +135°C / +32°F to +275°F

Outside tank
0°C to +40°C / +32°F to +104°F

Motor power

250 W

Drive unit weight

7.4 kg
16.3 lb

Electrical supply

230 V / 1.3 A
400 V / 0.75 A

Download
Mixing volume

700 Liter (at viscosity 1 cP)
185 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

50 - 490 RPM

Temperature range

Inside tank
Design Temperature 0°C to +150°C / +32°F to +302°F
Operating temperature 0°C to +135°C / +32°F to +275°F

Outside tank
0°C to +40°C / +32°F to +104°F

Motor power

250 W

Drive unit weight

7.5 kg
16.5 lb

Electric supply

230 V / 1.3 A
400 V / 0.75 A

Download
Mixing volume

1200 Liter (at viscosity 1 cP)
317 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

50 - 490 RPM

Temperature range

Inside tank
Design Temperature 0°C to +150°C / +32°F to +302°F
Operating temperature 0°C to +135°C / +32°F to +275°F

Outside tank
0°C to +40°C / +32°F to +104°F

Motor power

550 W

Drive unit weight

10.6 kg
23.4 lb

Electric supply

230 V / 2.4 A
400 V / 1.4 A

Download
Mixing volume

2300 Liter (at viscosity 1 cP)
608 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

50 - 490 RPM

Temperature range

Inside tank
Design Temperature 0°C to +150°C / +32°F to +302°F
Operating temperature 0°C to +135°C / +32°F to +275°F

Outside tank
0°C to +40°C / +32°F to +104°F

Motor power

750 W

Drive unit weight

15.4 kg
34.0 lb

Electric supply

230 V / 3.3 A
400 V / 1.9 A

Download
Mixing volume

6000 Liter (at viscosity 1 cP)
1585 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

50 - 490 RPM

Temperature range

Inside tank
Design Temperature 0°C to +150°C / +32°F to +302°F
Operating temperature 0°C to +135°C / +32°F to +275°F

Outside tank
0°C to +40°C / +32°F to +104°F

Motor power

1100 W

Drive unit weight

19.6 kg
43.2 lb

Electric supply

230 V / 4.7 A
400 V / 2.7 A

Download
Mixing volume

13000 Liter (at viscosity 1 cP)
3434 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

50 - 490 RPM

Temperature range

Inside tank
Design Temperature 0°C to +150°C / +32°F to +302°F
Operating temperature 0°C to +135°C / +32°F to +275°F

Outside tank
0°C to +40°C / +32°F to +104°F

Motor power

1500 W

Drive unit weight

24.5 kg
54.0 lb

Electric supply

230 V / 6.2 A
400 V / 3.6 A

Download
Mixing volume

22000 Liter (at viscosity 1 cP)
5812 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

35 - 340 RPM

Temperature range

Inside tank
Design Temperature 0°C to +150°C / +32°F to +302°F
Operating temperature 0°C to +135°C / +32°F to +275°F

Outside tank
0°C to +40°C / +32°F to +104°F

Motor power

3000 W

Drive unit weight

45.0 kg
99.2 lb

Electric supply

230 V / 11.8 A
400 V / 6.8 A

Download

Talk to an expert!

Do you need assistance to find the best fit for your application? Or do you need some customization? Talk directly with one of our engineers – we are here to help!

Technical support & customization

+46 (0)31 7613720 info@kest.se

Sales inquiries & cost estimations

+46 (0)31 7613720 order@kest.se