Kest Mixer Polymer Line – PLine

Finetuned to perfection.

Our new KM PLine range of mixers is built on 30 years of mixing experience, packaged in a robust and user-friendly product. Everything from its innovative sustainable drive unit options to the mixing head design and the bearing materials is built for one thing: perfect flow. Every day.

Technical specifications

PP - USP Class VI & ISO 10993

PP material, perfect choice for high corrosive applications.

ZERO particle shedding

The robust bearing combination of Zirconium oxide and SiC and the fine-tuned geometry, ensures no particle generation.

Sustainable - Green mixing concept

Our GREEN MIXING Concept is built on three cornerstones.
- No waste
- Low energy consumption
- Long lifetime

PP - USP Class VI & ISO 10993

PP material, perfect choice for high corrosive applications.

ZERO particle shedding

The robust bearing combination of Zirconium oxide and SiC and the fine-tuned geometry, ensures no particle generation.

Sustainable - Green mixing concept

Our GREEN MIXING Concept is built on three cornerstones.
- No waste
- Low energy consumption
- Long lifetime

Plastic is fantastic: meet the KM PLine

The Kest Mixer PLine is a new generation of aseptic magnetic coupled mixers in medical grade plastic material, perfect choice for high corrosive applications.

Robust bearing – ZERO particle shedding

The robust bearing combination of Zirconium Oxide (ZrO2) and Silicon Carbide (SiC) and the fine-tuned geometry, ensures no particle shedding in your media. The higher bending strength of the Zirconium Oxide material enabled us to do the male bearing in one solid piece, this optimizes the aseptic design and increase the robustness and low wear property. The particle shedding test was done by the independent research institute RISE in Sweden according to USP<788> PARTICULATE MATTER IN INJECTIONS, no particles could be detected.

ProFlow Remote drive unit – Less stress!

This new innovative drive unit is build upon our super efficient ProFlow technology. It allow you to get rid of the drive unit from the tank. This is good for saving space and to remove the load upon the tank and tank plate itself, you can even place the drive unit in a different room.

The drive magnet is connected to a flexible cord and with the Kest-Lock connection it is very easy to connect and disconnect it from the tank. The weight of the handle and drive magnet is significantly lower than the entire motor and gearbox, which improves ergonomics.

The GREEN MIXING Concept!

Kest has developed the Green Mixing Concept for sustainable production.
The Green Mixing Concept contains three important components:

–         No waste
–         Low energy consumption
–         Long lifetime

The mixer is designed to mix to the last drop, this means you can mix everything in the tank until it is empty – No waste.

The drive unit is equipped with a new super-efficient motor that reduces the energy consumption to a minimum, helping you to reduce your carbon footprint – Low energy consumption.

The mixer is a high-quality product engineered from 30 year of experience with the best suppliers and extensive quality control and testing, a robust design that will serve you for a long time – Long lifetime.

Technical specifications

  • The range covers up to 1200 Liters
  • Full traceability on all parts in media contact
  • 2.1 material certificate on all parts in media contact
  • Elastomers approved acc. FDA, USP Class VI

Technical specifications

Choose item

Mixing volume

30 Liter (at viscosity 1 cP)
8 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

50 - 680 RPM

Temperature range

Inside tank
Operating temperature 0°C to +60°C / +32°F to +140°F

Motor power

63 W

ProFlow Drive unit weight

2.5 kg
5.5 lb

Electric supply

24 VDC
3.5 A

Mixing volume

70 Liter (at viscosity 1 cP)
18.5 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

50 - 490 RPM

Temperature range

Inside tank
Operating temperature 0°C to +60°C / +32°F to +140°F

Motor power

63 W

Drive unit weight

3.0 kg
6.6 lb

Electric supply

24 VDC
3.5 A

Mixing volume

200 Liter (at viscosity 1 cP)
53 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

50 - 490 RPM

Temperature range

Inside tank
Operating temperature 0°C to +60°C / +32°F to +140°F

Motor power

63 W

Drive unit weight

3.5 kg
7.7 lb

Electric supply

24 VDC
3.5 A

Mixing volume

700 Liter (at viscosity 1 cP)
185 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

50 - 490 RPM

Temperature range

Inside tank
Operating temperature 0°C to +60°C / +32°F to +140°F

Motor power

754 W

Drive unit weight

6.2 kg
13.7 lb

Electric supply

48 VDC
18 A

Mixing volume

1200 Liter (at viscosity 1 cP)
317 Gallon (at viscosity 1 cP)
See selection guide on data sheet for correct sizing of the mixer

Viscosity range

1 - 800 cP

Speed range

50 - 490 RPM

Temperature range

Inside tank
Operating temperature 0°C to +60°C / +32°F to +140°F

Motor power

754 W

Drive unit weight

6.4 kg
14.1 lb

Electric supply

48 VDC
18 A

Talk to an expert!

Do you need assistance to find the best fit for your application? Or do you need some customization? Talk directly with one of our engineers – we are here to help!

Technical support & customization

+46 (0)31 7613720 info@kest.se

Sales inquiries & cost estimations

+46 (0)31 7613720 order@kest.se