FAQ

No, the Kest-Lock system is built on that one end needs to be a Kest-Lock flange and the other a TriClamp (TC) end. The Kest-Lock flange is built to host the split rings.

Contact your local distributor, you will find our partners if you click here Distributors or go to the main menu and click Contact>Distributors.

If you don’t find a local representative, send a request to order@kest.se or click on the button, “Get a quote”, on the top of the page.

Yes, it is possible in most cases for the components that have media contact.

Send a request to order@kest.se and we will return to you with an offer.

Most common materials that we handle is:

• 1.4539-904L
• SAF2205 1.4462
• SMO 254
• Ti Gr2
• 316Ti
• Hastelloy C2000
• C22
• C276
• SAF2507 1.4410
• AL-6XN-1.4529

The tank flange is welded into the tank that you are going to use. To support this operation we have developed a welding tool to the tank flange along with a detailed welding guide line.

We aim to maintain a stock for most of our standard product range. If not in stock, we have several production chains available to find the best lead time possible.

Normal lead time for non stock items is 4 to 6 weeks depending on volume.

Kest mixers and components are delivered in either cardboard boxes or wooden crates.

Each item is sealed in vacuum plastic bag, labelled with article code and packed in a box.

Each component is marked with ID No. or heat number for full traceability.

Contact your local distributor, you will find our partners if you click here Distributors or go to the main menu and click Contact>Distributors.

If you don’t find a local representative, send a request to order@kest.se or click on the button, “Get a quote”, on the top of the page.

Yes, it is possible in most cases for the components that have media contact.

Send a request to order@kest.se and we will return to you with an offer.

Most common materials that we handle is:

• 1.4539-904L
• SAF2205 1.4462
• SMO 254
• Ti Gr2
• 316Ti
• Hastelloy C2000
• C22
• C276
• SAF2507 1.4410
• AL-6XN-1.4529

The Kest Sampling unit is installed with a TriClamp connection, like the Kest-Lock.

Kest mixers and components are delivered in either cardboard boxes or wooden crates.

Each item is sealed in vacuum plastic bag, labelled with article code and packed in a box.

Each component is marked with ID No. or heat number for full traceability.

Contact your local distributor, you will find our partners if you click here Distributors or go to the main menu and click Contact>Distributors.

If you don’t find a local representative, send a request to order@kest.se or click on the button, “Get a quote”, on the top of the page.

We aim to maintain a stock for most of our standard product range. If not in stock, we have several production chains available to find the best lead time possible.

Normal lead time for non stock items is 4 to 6 weeks depending on volume.

Kest mixers and components are delivered in either cardboard boxes or wooden crates.

Each item is sealed in vacuum plastic bag, labelled with article code and packed in a box.

Each component is marked with ID No. or heat number for full traceability.

The normal delivery time from order is:

Mixer tank plates and welding tools 2-4 weeks.

Mixing head, Male bearing and drive unit – 8 to 10 weeks.

Atex drive units – 10 to 12 weeks.

Tri Clamp (also known as Tri Clover) is a tubing connection system that allows making sanitary interconnections in stainless steel fluid transport systems. It is commonly found in the Pharma, food processing, dairy, wine, and beer brewing industries, where hygiene is critical and any space, crevice, thread, or gap which can harbor bacteria must be avoided. They are easy to assemble, disassemble, and clean.

TC is commonly used as an abbreviation for Tri Clamp.

Rheology – is the study of the flow of matter, liquids and solids.

Kest has a fully equipped test center where we perform customer tests. We also have the possibility to ship the equipment if you like to make a test on site.

Kest and our partners are always here to help -we will help you to select and size your mixer.

Contact your local distributor, you will find our partners if you click here Distributors or go to the main menu and click Contact>Distributors.

If you don’t find a local representative, send your question to info@kest.se or go to the main menu and click Contact>Contact form to send us a question or reach us by phone.

Contact your local distributor, you will find our partners if you click here Distributors or go to the main menu and click Contact>Distributors.

If you don’t find a local representative, send a request to order@kest.se or click on the button, “Get a quote”, on the top of the page.

Yes, it is possible in most cases for the components that have media contact.

Send a request to order@kest.se and we will return to you with an offer.

Most common materials that we handle is:

• 1.4539-904L
• SAF2205 1.4462
• SMO 254
• Ti Gr2
• 316Ti
• Hastelloy C2000
• C22
• C276
• SAF2507 1.4410
• AL-6XN-1.4529

The tank plate is welded into the tank that you are going to use. To support this operation we have developed a welding tool to the tank plate along with a detailed welding guide line.

Note! Always use the welding tool and follow the welding guideline! 

The male bearing is installed on the tank plate and the mixing head is mounted on top of the male bearing. If you don’t reach to the tank plate we have tools that enables you to perform this operation from a hatch on top of the vessel.

The drive unit is installed from the out side and fasted with our Kest-Lock quick connection.

Note! Never attach or detach the mixing head while the drive unit is installed!

Kest mixers and components are delivered in either cardboard boxes or wooden crates.

Each item is sealed in vacuum plastic bag, labelled with article code and packed in a box.

Each component is marked with ID No. or heat number for full traceability.

The normal delivery time from order is:

Mixer tank plates and welding tools 2-4 weeks.

Mixing head, Male bearing and drive unit – 8 to 10 weeks.

Atex drive units – 10 to 12 weeks.